Gravity Separation & Concentration Equipment

  • gold shaking table (3)rp-4-shaker-table
    gold shaking table (3) rp-4-shaker-table
    The RP-4 shaker table is the most widely used and most successful gold gravity shaking concentrating table worldwide, used by small and large mining operations and the hobbyist. The patented RP-4 is designed for separation of heavy mineral and gemstone concentrate. usa manufacturer The RP-4 table can process up to 600 (typically 400) lbs. per hour of black sand magnetite or pulverised rock with little to no losses. The RP-4 uses a unique reverse polarity of rare earth magnets, which will cause the magnetite to rise and be washed off into the tails. This allows the micron gold to be released from the magnetite, letting the gold travelling to the catch. The RP-4 is compact and weighs 60 lbs. With a small generator and water tank, no location is too remote for its use. The RP-4 is a complete, ready to go gold recovery machine.1-year-warranty THERE ARE NO SCREEN INCLUDED with the small shaking table. Use was reservoirs greater than 250 gallon and recycle all your water. Only 400 Watt of power drawn by typical pump. The small RP4 gold shaking has a "mini" deck of 13"wide  x 36" long = 3.25 square feet of tabling area. The RP-4 is the best and longest selling small miner shaker table still on the market today.rp4 With over 5000 units sold during the last 10 years! Review the RP-4 Operating Manual and Installation Guide lower on this page. RP4 Shaker Tables Ship-out in under 5 business days. Make your own stand
  • gemeni_gold_tablegemeni-table
    gemeni_gold_table gemeni-table
    For sale is the famous Gemeni Table known to generate a bullion grade gold product from low grade concentrates at high recoveries. A unique table design allows for the production of a gold concentrate that can be directly smelted to bullion. Features
    • Direct, fixed speed feed system
    • Table can be operated in batch or continuous mode
    • No massive foundation required
    • Available for single or three phase power supply
    • Simple operation
    • Adjustable feed rate
    • Deck constructed of hard wearing gel coat with GRP backing.
    • Adjustable “bump stop” to control deck motion amplitude
    • Recessed deck grooves for gold collection
    • Multiple dressing water cock valves for wash water control
    • Central water manifold constructed for resistance to attack by contaminated process water
    Shaker Table Operation The Gemeni Table has been specifically designed for the recovery of fine gold to a directly smeltable concentrate. The direct drive system incorporates a geared motor, driving a crank connected to the table deck. The crank includes a spring connection system to absorb over run. The bump stop system provides a fine tuning mechanism. Table tuning is achieved by adjustment of a single screw.
  • concentrating table (1)concentrating table (3) Sale!
    concentrating table (1) concentrating table (3)
    The perfect small miner shaker table measures in at 36" x 60" (3' x 5') or 15 square feet of tabling area. Its all carbon steel frame holds on 3 legs at some 3' from the ground. The table's deck is made with a CNC machined 3/8" thick high-density polyethylene (HDPE) laminated on a 16 gauge steel bed. The table has 5" wide concentrate troughs also made of thick 16 gauge steel. The troughs are commonly used as: 2 high grade concentrate, 1 middlings and 1 tailings outlet. The deck of this precision built gravity concentrating table has an adjustable incline and everything on it is either TIG or MIG welded. A 1" diameter pipe insures a generous wash water supply. canada manufacturer This concentration table comes with a convertible multi-current motor 110/220 Volts for 50/60 Hz and a standard variable speed drive allowing you to optimise your table' stroke speed. The table comes complete with built-in stand. The complete table weighs in at around 200 lbs. The Quake 5VS3 has 4-5 times the deck area of an RP4.
  • laboratory_wilfley_tablewilfley-lab-table Sale!
    laboratory_wilfley_table wilfley-lab-table
    The Wilfley Laboratory Concentrating Table, capacity of 100 lbs per hour on - 20 mesh, +200 mesh feed, complete with one interchangeable 18" x 40" right hand molded fiberglass construction table top, one sand deck, capacity for complete with motion generator, drive frame, feed and discharge launder, constant speed drive, adjustable stroke, with 1/3 HP/115 -230 V/1 Ph/60 Hz TEFC motor. Shipped completely assembled on a fabricated steel base.Wilfley table for sale
    • Shipping Weight: 490 lbs.
    • Ship Volume: 63 Ft3
    • Capacity of 50 kilos/hour
  • fine gold recovery equipment (1)falcon concentrator fine gold recovery equipment Sale!
    fine gold recovery equipment (1) falcon concentrator fine gold recovery equipment
    The i150 Gravity Concentrator is the smallest of the World famous iCONs. This is a gravimetric concentrator that uses enhanced gravity (G’s) to concentrate the 'free’ heavy minerals. It is also known as a centrifugal concentrator because of the centrifugal actcanada manufacturerion of the spinning bowl. The process uses only water and an electric motor to concentrate the precious heavy minerals from a slurry. The i150 is the heart of the iCON product line. At a capacity of 2 tons per hour solids, the iCON i150 is commonly used for:
    • Hard Rock Precious Mineral Recovery - due to the 2 TPH capacity
    • Exploration/Sampling - due to the convenient size/mobility
    • Artisanal Placer mining - due to it economic low- price and high reliability
    • Recovering fine gold down to 400 mesh (37 microns)
    Why is the i150 "Mini Falcon" the best gold centrifugal concentrator:
    • Low Machine Weight
    • distributor supplier manufacturerOnly 1 Moving Part
    • Wear Components Replaceable in the Field
    • Serviceable with Common Hand Tools
    • Ease of Installation/Operation
    • Excellent Value at a Fair Price
    • 1.5 minute Clean Out Time
    • High Concentration Ratios
    • VFD / Soft Start Included
    If you are not sure your gold can be recovered by gravity; contact us, we'll tell you.
  • gold processing plantfine gold recovery equipment (5) Sale!
    gold processing plant fine gold recovery equipment (5)
    The IGR 100 Modular Gold Processing Plant is a self-contained fine gold recovery equipment system. It uses classification and enhanced gravity to assure you are catching the finest gold and the big nuggets. In the standard configuration material flows as follows: canada manufacturer
    • The miner feeds sand/gravel into the vibrating screen
    • The screen divides your feed into 2mm plus & 2 mm minus size fractions
    • The 2mm plus passes over the screen, over the Mini Grizzly & the Sluice
    • The 2mm minus will pass through the screen & down to the slurry pump
    • The pump will move the fine material up & into the concentrator
    This 2 class process is designed by Metallurgical Engineers for maximum recovery of precious heavy minerals. Capacity: 2 tons per hour passing the screen to the concentrator distributor supplier manufacturerThe feed to the screen will be greater depending on the size distribution of your material Electrical Requirement: 8kW 220Volt Generator, Single Phase Water Consumption: 50 mm external pump is suggested (not included) The Complete Fine Gold Processing Plant includes one:
    • iCON i150 Concentrator
    • iCON iPump 1.0
    • iCON iScreen 12" x 24" with 2mm screen
    • Mini Grizzly and Sluice to capture and ‘Screen Oversize’ that you have
    • Control Station to conveniently arrange your electrical and water supplies
    • Installation Kit to connect all components
    xrf -
  • flour gold recovery equipmentfine gold recovery equipment (24) Sale!
    flour gold recovery equipment fine gold recovery equipment (24)
    The i350 is a family member of the Falcon Gravity Concentrators Gold Mining Equipment which has revolutionizing the world of alluvial gold mining and dredging the same way its little brother, the i150, has impacted the world of hard rock mining. This is a gravimetric mineral concentrator that uses enhanced gravity (G’s) to concentrate the ‘free’ heavy minerals. It is also known as a centrifugal concentrator because of the centrifugal action of the spinning bowl. This equipment lets you Recover Gold without Chemicals with a process that uses only water and an electric motor to concentrate the precious heavy minerals from a slurry.canada manufacturer At a capacity of 10-15 tons per hour solids, the i350 is commonly used for:
    • Alluvial / Placer Mining
    • Dredging
    • Hardrock mining within a grinding circuit
    Due to the ability to capture fine gold and the high concentration ratios, the i350 Gravity Concentrator can be used to minimize the length of your sluice and minimize the amount of concentrate in your operation. If you host GRG Gravity Recoverable Gold, the i350 is the ultimate gold recovery machine.
  • 6ft_dredge_01
  • gold wash plant - scrubber and trommel
  • shaker table (4)shaker table (6)
    shaker table (4) shaker table (6)
    china manufacturerThis 911MPELY1050 laboratory (gold) shaker table has its inner deck made of aluminium alloy, it concentrate/tailing launder manufactured in stainless steel, and its strong shaker table stand if middle steel. This shaker's deck is 1.1 m long X 50 cm wide. It weighs in at 150 Kg (330 lbs). Its head motion mechanism emulates Wilfley's bumping motion. The shaker table' stroke can be adjust between 9 and 17 mm (3/8" and 5/8") at a shaking frequency of 280 to 460 cycles/minutes. Select between a SAND or SLIMES Deck for your table. 1-year-warranty First 90% of all people using concentrating tables use the sand deck. The sand deck is efficient in separating high density from low density material (with a difference of 1 SG unit), in the particle size range ranging from 10 mesh to 150 mesh. Slimes decks are used for particles in the 150 to 325 mesh range. A common observation made by those using the slime deck; the surface tension of water interferes with recovery in this particle size range. This is probably why 90% of people using the tables use the sand deck, also.
  • duplex mineral jigjig concentrator (1)
    duplex mineral jig jig concentrator (1)
    The Duplex Mineral Jig Machine belongs to gravity concentrating device that separates material based on differing densities of the material. The Jig is widely used in concentration of heavy minerals such as tin, gold, tungsten, manganese and barite. The 911MGTK-XCT Laboratory Mineral Jig Machine is an ideal instrument for research of beneficiation of ferrous metal and nonferrous metal. Laboratories or small tonnage producers can select from either a 4" x 6" or a larger 12" x 18" and start jigging now! 1-year-warranty Larger jig concentrators for up to 10 Ton/hours are also available.  The  Duplex  jig  was  designed  in  the  first  place  as  a  unit  cell working  in  the closed circuit of a  ball  mill.  It can  take a  long-ranged feed, and involves  but little loss of height between mill  discharge and delivery of its  tailing discharge to  the classifier.  The rotary  valve c can  be adjusted so as  to  open  during  the  required  portion  of  the  jigging  cycle,  thus  admitting  hydraulic water in  phase either with  the suction  or the pulsion  stroke, which is  applied  by  means  of a  flexible  diaphragm  a.  This  modification  in  jig design has led to increasing applications of the machine, which can be adjusted so as to produce fairly sharp separation of material down to coarse sand sizes. Duplex jigs  embodying  this  phased  control  of the  hydraulic  water  are  now used outside the closed circuit, one important application being in the "roughing"  of diamond  gravels.  By  suitable  adjustment  of the  rotary  water-valve any  desired  variation  can  be  arranged,  from  complete  neutralisation  of the suction  stroke  with  hydraulic  water  to  a  full  balance  between  suction  and pulsion.  Jigging is  through a  wedge-wire screen.
  • laboratory mineral separator c-800laboratory_mineral_separator Sale!
    laboratory mineral separator c-800 laboratory_mineral_separator
    Rapid separation of mineral grains for mineralogists, metallurgists and mill operators. The 911C800 Laboratory Mineral Separator is a valuable tool for metallurgists, mineralogists and mill operators. It quickly and efficiently separates mineral grains of close specific gravity. The Superpanner is a Mechanism invented by Professor H. T. Haultain which simulates rocking,bumping, and sluicing action used in panning, and gives precise information as to possibility of gravity treatment of sands. Used in rapid assays and as a research aid.uk manufacturer Tabling tests can begin with individual treatment of each size from about 50 mesh down to, say, 20um on a Haultain superpanner. If material can be concentrated by gravity methods (tabling, vanning, and spiralling included), it can be concentrated on a superpanner. If this instrument fails, no commercial method will succeed on fine sizes. The super-panner is a miniature shaking table into which are built most, if not all, of the motions used in panning. A sample of a few grams can be tested, or some hundreds of grams can be worked in successive additions and particle removals. There is, in fact, no great virtue in using more than a light charge when testing for a gravity process, but bigger quantities are treated when search is being made for particles of heavy minerals only present in very small amounts. The advantage to the microscopist of being able to examine a sample of, say, half a gram which should contain all the heavier minerals from a total of half a kilogram are obvious. Any desired texture of decking can be used on the superpanner, linoleum and stainless steel being sufficient for most work. Adjustments are for side and end shake. slope, bump, stroke length and speed, and sluicing water. A most effective instrument and it has always been a puzzle to me that it is not been universally used by millmen.
  • laboratory gravity concentratorlaboratory_gravity_concentrator
    laboratory gravity concentrator laboratory_gravity_concentrator
    The Falcon L40 enhanced gravity concentrator has a bowl diameter of 4” and is specifically designed for laboratory test-work on small ore samples. Applications include the concentration and upgrading of gold, platinum group metals, mineral sands, chromite, tin, tantalum, tungsten, iron ore, cobalt as well as many other metals and minerals with sufficient differences in specific gravity. It is used for the simulation of industrial scale Falcon high-G gold centrifuge models: Ultra-Fine (UF), Semi-Batch (SB), Continuous (C). The applicable model and operating parameters are dependent on sample specific features, such as the particle size and desired mass yield.canada manufacturer A fabricated adjustable L40 steel stand and 50 liter agitated stainless steel tank are optional additions. The machine is of stainless steel construction and a two stage UHMW polyethylene bowl. The materials of construction have been carefully selected to minimize the possibility for contamination between samples. The rugged functional design of this unit means that it is perfect for use at an exploration site or mineral processing laboratory.
  • lamulti-gravity oratory (4)gravity-mining-multi-gravity-separator-3 Sale!
    lamulti-gravity oratory (4) gravity-mining-multi-gravity-separator-3
    The 911MPEC900 Laboratory or Pilot plant multi-gravity separator (MGS) is a compact and mobile unit suitable for laboratory or on-site pilot plant investigation into the continuous separation of minerals of different specific gravities in liquid suspension. It is able to separate two minerals from each other or separate a group of heavy minerals from lighter "gangue" material, provided that there is a reasonable difference in specific gravities. The MGS is suitable for the treatment of fines and ultrafines with a maximum particle size of approximately 150µm (0 .15mm) and lower limit of approximately 5µm (0.005mm).made_in_uk Typical applications include
    • the scavenging of precious metals or valuable minerals from tailings or slimes streams
    • pre-concentrating heavy mineral sands or industrial minerals (anatase, barytes, chromite, coal etc.)
    • upgrading flotation concentrates, concentrating base metal oxides, sulphides, uranium etc. from primary ores
    • treatment of alluvial ores in general
  • enhanced gravity separator (1)enhanced gravity separator (1)
    enhanced gravity separator (1) enhanced gravity separator (1)
    Our Enhanced Gravity Separator systems can be found in applications ranging from the recovery of precious metals and base metal minerals, to upgrading industrial minerals. In addition previously untreatable coal fines & waste materials are able to be upgraded and cleaned without the use of chemicals. This Multi Gravity Separator will enhanced mineral separation for:
    • Base Metal Oxides
    • Base Metal Sulphides
    • Precious Metals
    • Industrial Minerals
    • Tailing Deposits
    • Chrome, Copper, Lead Zinc, Tunstan, Tantalum, Gold, Iron
    • Tin, Coal, Barites, Celestile
    • Fluorspar, Titanium, Antimony
    Operational Advantagesuk manufacturer
    • Field-proven robust & compact design
    • Fine and ultra-fine separation from 100μm to 5μm
    • Energy efficient - mobile deployable
    • Minimum maintenance & operating supervision required
    • Requires no chemical or physical reagents
    • High grade concentrate capability
    • Spare part support and optional field visits
    THE BIG MOZLEY 911MPEC902 MGS Industrial Mine Scale is yours to discover. Contact us today.
I Need Assistance