Geology & GeoMetallurgy

Geology & GeoMetallurgy 2017-04-04T06:58:01+00:00
  • To participate in the 911Metallurgist Forums, be sure to JOINLOGIN
  • Use Add New Topic to ask a New Question/Discussion about Geology and Geometallurgy.
  • OR Select a Topic that Interests you.
  • Use Add Reply = to Reply/Participate in a Topic/Discussion (most frequent).
    Using Add Reply allows you to Attach Images or PDF files and provide a more complete input.
  • Use Add Comment = to comment on someone else’s Reply in an already active Topic/Discussion.

Enrich Alumina from Bauxite (2 replies)

Alan Carter
2 years ago
Alan Carter 2 years ago

Am needing help on How to enrich alumina in low grade bauxite Al from 42% to 46%, from a low grade bauxite mines with Al 43%, Silica 7.5 %, Iron 28% reserves 15 million tonnes, with Al2O3 43%, can anybody suggest a beneficiation process to enrich Al2O3 to +46% and silica below 5%.for using in an aluminum plant?

Tony Verdeschi
2 years ago
Tony Verdeschi 2 years ago

I seem to recall making a suggestion to do a thorough mineralogical investigation on a size-by-size basis to identify the opportunities to reject Fe and Si. Where it went in the www/ether is an open question but it may also be that it did not get posted due to getting a new computer and troubles familiarizing myself with the keyboard and ultra-sensitive mousepad. Unless the mineralogical characterization is done, you cannot have the confidence that a suggested beneficiation process is going to work; A good mineralogical/material characterization study will give you that confidence and point you in the right direction.

Victor Bergman
2 years ago
Victor Bergman 2 years ago

I agree, knowledge first. First step would be to "know your ground", full majors elemental analysis (Na if you can, K, Mg, P, Ca, Ti, Cr, Zr, Ni). Is your reported Fe FeO and Si SiO2?

Then XRD, but you may have poorly crystalline or amorphous material included, but the knowledge would be useful anyway.

Then possibly a mineral to element map, either through an automated mineral analyser (ala MLA/QEMScan/INCA etc.) or just find a friendly SEM and run a quick scan or two. This will give you more knowledge on deportment and association, preferably in intact samples. If your presented datain your message is in oxide form you still have 28% other elements(+oxygen). Then you will get an idea of which metallurgical approach to take. The SiO2 deportment will be essential as it is a prerequisite target.

Or, you can do it the limited pre-knowledge way, and do a large batch of incremental metallurgical tests. Both approaches work, depends how much time, labour, laboratory facilities and money you have.

As this is posted in geomet, you would also want to understand the variability in your ore. Do you suspect significant variability across your ore zone? Grain size/agglomerate size may then become important.

Please join and login to participate and leave a comment.

BUY Laboratory & Small Plant Process Equipment

We have all the laboratory and plant equipment you need to test or build/operate your plant.

ENTER our Mining Equipment' Store

We Sell EQUIPMENT for all types of Mineral Treatment PROCESSES and Laboratory Testing needs

Have a Mineral Processing QUESTION?

Come in, ask your question

911Metallurgist Community Forums

Talk to other metallurgists and be helped.


We can IMPROVE ALL PLANTS / Mineral Processing Engineering & LABORATORY Ore Testing

911Metallurgy Engineering

Contact us for process engineering, metallurgical investigations, plant optimization, plant troubleshooting, needs. WE “FIX” METALLURGY.