Vanning Plaque Laboratory Pan & Hand Gold Pans
The Vanning Plaque Laboratory Pan was originally designed by Professor Richards and has found wide acceptance for panning small amounts of fine material. The surface is white, with baked enamel finish. This unit is especially useful for laboratory work in studying the products from concentration tests. It is available in one size only and shipping […]
Laboratory Agitator
Air-lift Laboratory Agitator Laboratory Air-lift Agitator was specially developed for use in continuous testing laboratories and pilot plant operations. This agitator is similar in design to a large scale continuous commercial agitator and accordingly the results obtained can be directly calculated for the large tonnages of commercial operation. Gear drive mechanism is totally enclosed, with integral rake […]
Bin Discharge Gates
Rack and Pinion Bin Discharge Gate (Rack and Pinion) Bin Gate consists of a steel plate door, steel shaft, cast iron guides, hand wheel, pawl, rack, and pinion. These parts are all built of the best materials, carefully machined and assembled. This type of gate meets the need for a simple means of control of […]
Timber Framing Equipment
Timber Framer is a necessary piece of equipment for any mine using considerable mine timbers. Framing timbers by hand has become obsolete at larger properties since the development of this economical and efficient machine. In operation a log is placed in the chucks and pushed through the saws; the chucks are then thrown over ninety […]
Reagent Emulsifier
The (Disc Type) Reagent Emulsifier is used to emulsify flotation reagents with water before introducing them into the cells. By using this unit greater efficiency is attained from reagents, decreasing the amount necessary to produce the best flotation results. The unit consists of a sturdily constructed tank and impeller, together with the driving motor, on […]
Laboratory Cyanide Leach Plants
The (Batch) Laboratory Cyanide Plant was designed to assist the purchaser in determining what style of plant he needs for his particular ore. While an assayer’s test offers no particular difficulty, the ore may pack and prove impervious to solution when full size mill operation is attempted. To do away with this possibility a low […]
Air Compressor
Compressed air in a mill is very desirable. It is used in cyanide agitators and solution tanks for supplying excess air required for efficient dissolving of gold values, air agitation of liquids, for elevating pulps by means of an airlift, agitation of pulps in filters, cleaning machinery, operating air hoists, forges, reciprocating and rotary air […]
Small Ball Mills
A PULP level sufficiently high to interpose a bed of pulp, partly to cushion the impact of the balls, permits a maximum crushing effect with a minimum wear of steel. The pulp level of these Small Ball Mills can be varied from discharging at the periphery to discharging at a point about halfway between the trunnion and […]
Mine Shaft Cage
Mine Cages are designed from experience acquired by building hundreds of cages in various sizes and types. These cages are built with highest quality material and precision workmanship. As shaft dimensions vary, Mine Cages can only be built on order. When asking for quotations or ordering cages or chairs, list the dimensions of your shaft […]
Flotation Blowers
Rotary Blower for pressure and vacuum service is universally used with gas or oil burners, furnaces forges, ovens, etc. Two inter-engaging impellers, rotating in opposite directions draw air into the pockets between the impellers and the case, and force this air into the discharge pipe. The amount of air displaced by these impellers at each revolution […]