Badger Jaw Crusher
With its 5″ x 7″ jaws, the 800 lbs Badger Jaw Crusher provided exceptional crushing capacity of 1300 lbs/hr (at 3/4″ P80) with minimum power consumption obtained by a unique 400 RPM movable jaw plate motion.
Chipmunk Jaw Crusher
Chipmunk Crushers have been around for decades. The Chipmunk is a very solid high performance 300 lb crusher mostly used in laboratory. Its jaw opening in 2 1/4″ x 3″. The Chipmunk Jaw Crusher cost around $4500 without motor and $7000 with motor. An alternative to buying a chipmunk crusher is the 911MPEJAC23 rock crusher without or […]
Chrysocolla Flotation
The effect of pH on the flotation response of Chrysocolla and chalcocite with potassium octyl hydroxamate as collector. The potential for the chalcocite system is slightly oxidizing. A detailed electrochemical investigation of chalcocite with a collector that does not oxidize, namely a chelating compound, potassium octyl hydroxamate shows the pH dependence of the floatability of chrysocolla (a hydrous […]
Flotation Tests
Batch and continuous flotation tests are the quickest, safest, and most economical method of determining flotation and other ore dressing problems. Best use an ore testing facilities under the direction of experienced metallurgical engineers. Tests eliminate errors and are moderate in cost. Laboratory equipment is available for complete tests covering grinding, flotation, gravity concentration, amalgamation, leaching, […]
Flotation Flowsheets: Key Types and Benefits
A flotation flowsheet should be as simple and flexible as possible, because changes in the ore often necessitate changes in treatment: the more flexible the flotation machine, the easier and quicker the changes can be made, not only in regard to flexibility in arrangement of cells, but also the ability to treat coarse as well as […]
Flotation Cells
More ores are treated using froth flotation cells than by any other single machines or process. Non-metallics as well as metallics now being commercially recovered include gold, silver, copper, lead, zinc, iron, manganese, nickel, cobalt, molybdenum, graphite, phosphate, fluorspar, barite, feldspar and coal. Recent flotation research indicates that any two substances physically different, but associated, […]
Flotation Cell Design
The task for the “Sub-A” Flotation Machine-Cell design is solid as it is made of heavy steel joints are electric welded both inside and out. Partition plates are furnished with gaskets and arranged for bolting to partition channels so that if necessary all of the plates can be changed at any time in the field […]
Difference Between Clarifier and Thickener
The Difference Between a Clarifier and a Thickener is subtle as they will visually look the same. Fundamentally, thickeners and clarifiers are both used to settle solids which results in the separation of liquids and solids. Thickeners are used to concentrate solids, while clarifiers are used to purify liquids. A thickener will give you a high density […]
Standard Bond Ball Mill Grindability Test Method-Procedure
Here is the old Allis-Chalmers Bond Work Index Grindability Test Procedure. The standard feed is prepared by stage crushing to all passing a 6 mesh sieve, but finer feed can be used when necessary. It is screen analyzed and packed by shaking in a 1000-cc graduated cylinder, and the weight of 700 cc is placed […]
Laboratory Support
SUPPORT, Iron, Rectangular Base—Heavy, stable cast iron rectangular base, with corner legs care-fully ground to insure solidity and upper surface ground flat, with heavy tapped boss to take the support rod, protectively coated with baked-on japan. With copper plated steel support rod. SUPPORT, Iron, Rectangular Base—Similar but fitted with detachable black japanned cast iron rings with screw clamps. […]