Placer gold has tantalized many a person who has tried his luck and skill in the hope of striking it rich. Separating gold from embedded
Once aboard the dredge, the dredged material is classified, its valuable portion recovered, and its waste portion disposed in a coordinated recovery disposal system designed
At present dredge mining in this country is at a low level. The last gold dredge in California stopped operating in October 1968. Gold dredging
The Microcel™ sparger consists of in-line static mixers and a centrifugal pump. Tailings slurry is pumped from the base of the column through the static mixers, where air and
Flour gold can be defined as ultra-fine gold found in a low micron size fraction, often smaller than 74 microns or 200 mesh. Reality is
Shaker tables, as the name implies, utilized a Shaking action for conveying the refuse and discharging it over the refuse end. The tables were hung
Several types of eddy current separators have been developed in recent years. These separators range from slide chutes lined with alternating permanent magnets to electromagnetic
The eddy-current separator was initially developed to recover non-ferrous metals from shredded automobile scrap or municipal solid waste. In these applications the metallic fraction consists
Six-Spheres test: The conventional test consisting of compressing the pellet between parallel flat platens does not simulate very well the environment actually encountered by the pellet.
The CMI centrifuge is a positive discharge scroll type centrifuge employing a profile wire screen mounted within a basket which is fastened to an outside