August 31, 2016
No Comments
- Learn Mining & Metallurgy
- Buy Process Equipment
- Contact
Uraninite and masuyite are the major uranium minerals, essentially fine grained, in the ores studied. Over 40% of the uranium is distributed in the -8µm
The ‘froth factor’ is a measure of the air contained in the froth. It is quantified by filling a measuring cylinder or bucket, of known
I once had to conduct an MIBC frother test to confirm if it could give me better flotation results than the glycol frother my client
A process for aerating or oxygenating cyanide solutions was announced by T. K. Prentice in the Jour. C.M. and M.S.S.A., February, 1934 (see Fig. 56).
That cyanide solutions in works practice do not remain pure in a chemical sense is to be expected, having in view their contact during treatment
Altitude-pressure and Standard Saturation Curves: Chart A (Fig. 55) is used to determine barometric pressure at various altitudes; Chart B is used to determine standard saturation
Manufacturing Cyanide Sodium cyanide is a white, deliquescent, crystalline material easily soluble in water. The basic sources are alkalis or alkaline earths, atmospheric nitrogen, and
In both cyanidation and flotation practice it is necessary to keep a close check on the working solutions, since the concentration of various soluble salts
The press-tails solution going to storage discharges into a spill box (A in drawing), thence passing through a bottom pipe into the barren-solution storage tank.