Here is a list presented in table form of Rod Mill Work Index as tested/presented by SME handbook of mineral processing, N.L Weiss Editor, N.Y. 1985.
This table of various minerals (ore, rock types) listed by their tested SG specific gravity complements the BWi List found in earlier post. Source 1:
This Table of Ball Mill Bond Work Index of Minerals is a summary as tested on ‘around the world sample’. You can find the SG of
Storage of Solution polymers that are shipped in bulk, tote bins or in plastic drums. Solution polymers should be stored between 35º and 105°F and
Dry polymers are typically made down to 0.25% solutions by adding 0.5 grams of polymer to 200 mLs of water. Use the same water for
Emulsion polymers are polymer in oil emulsions and are designed to “break” out of this emulsion into a water solution at 0.5 to 1.0%
Here is a Procedure for the Preparation of Solution Polymers: Solution polymers can be made down to any convenient concentration for laboratory testing. Suggested solution concentrations
This method for Beaker decantation is a technique used to separate a mineral sample into two size fractions according to the differences in settling velocities of
The choice of Settling and Thickening test method and procedure depends to some extent upon the temperature of the pulp, its flocculating characteristics, the required supernatant clarity,
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual