Classifiers

Dewatering Screw Classifiers

Dewatering Screw Classifiers once had a wide vogue and still are used in some pulp circuits. They were more or less troublesome because solids tended to accumulate on the sloping sides, sloughed off periodically, and plugged the discharge in the apex; the sand discharged was too dilute and contained too much slime; and sand was … Read more

Screw-Spiral Classifier: Select, Size & Install

The size of mechanical classifier required for a particular job depends on the following factors: Tons of dry solids to be overflowed per 24 hours. This is simply a predetermined tonnage. Mesh size at which separation is to be made. The mesh size is determined by laboratory tests or is already known from previous experience. … Read more