Beneficiation of Iron Ore and the treatment of magnetic iron taconites, stage grinding and wet magnetic separation is standard practice. This also applies to iron ores of the non-magnetic type which after a reducing roast are amenable to magnetic separation. All such plants are large tonnage operations treating up to 50,000 tons per day and ultimately requiring grinding as fine as minus 500-mesh for liberation of the iron minerals from the siliceous gangue.
Magnetic separation methods are very efficient in making high recovery of the iron minerals, but production of iron concentrates with less than 8 to 10% silica in the magnetic cleaning stages becomes inefficient. It is here that flotation has proven most efficient. Wet magnetic finishers producing 63 to 64% Fe concentrates at 50-55% solids can go directly to the flotation section for silica removal down to 4 to 6% or even less. Low water requirements and positive silica removal with low iron losses makes flotation particularly attractive. Multistage cleaning steps generally are not necessary. Often roughing off the silica froth without further cleaning is adequate.