Programmable Laboratory Bottle Roller

Programmable Laboratory Bottle Roller


The 911MPEBR500 is a machine used for laboratory bottle rolling. The rollers can be adjusted to fit several sizes of bottles.
Using the bottle roller will result in grinding and mixing the sample at an adjustable rotating speed.

The rollers can be easily adjusted to meet the required bottle size.europe manufacturer

The bottle roller is equipped with a safety cage and closed down with a manual safety switch. The cage will be supported with pneumatic springs.

  • Interval reversing program. Max 60 intervals per 24 hours.
  • From 5 seconds up to 99 days programmable.
  • From 29 to 280 RPM drive speed. Bottle speed is depending on the bottle size.
  • Easy adjustment key included for different bottle sizes.

If you want another size or a machine for multiple bottles? Please don’t hesitate to contact us. Our team can always find a solution for your requirements.

Use this roller for cyanidation, acid or any leach test.





Bottle Roller

When selecting the right place for your laboratory bottle roller, please consider the following:

  • Put the device on smooth, horizontal and stable place.
  • Leave enough space beyond the device for normal air circulation, minimum 200 mm (8 inch) at the back of the machine.
  • Leave enough space around the device, that you will easy control and maintain it.
  • Don’t use the device in surroundings, where there are fast temperature and humidity changes. Also avoid places exposed to direct sunlight and places nearby heating devices.
  • Avoid places, where the possibility of shocks and vibrations exists.

Note: The machine should not be placed so, that it is difficult to pull out the cord plug from mains power supply.

laboratory_bottle_roller_002 laboratory_bottle_roller_003
laboratory bottle rolling station (1) laboratory bottle rolling station (2)

You may also like…

I Need Assistance