Laboratory Vacuum Drying Oven
US$10,000
The 911MPE selection of Laboratory Soil Drying Oven offer an outer shell made from cold-rolled plate with 1.5 mm thickness, metal hammer paint finish which is high temperature resistant.
The inner walls are made of stainless steel of 1.2 mm in thickness which is reinforces the stainless steel frame. An 100 mm thick aluminium silicate fibre insulation between the outer shell and inner walls to ensure an excellent insulating performance.
Two independent doors in oven front, two trolleys made of stainless steel, and , for our extra large ovens, each with 10 layers shelves.
Two sets of stainless steel heaters are installed on the left and right sides of the air duct opening.
Temperature Range: RT-250 or RT-300℃ adjustable, with temperature rising 4-5℃ per minute. Standard power source is 380V/50HZ.
The workshop is designed with left, right and top air circulation duct, with a force circulation system, providing horizontal and vertical airflow.
Over-temperature protection mechanism, when temperature exceeds the set temperature, over-temperature protection device will auto-start, heating power will be cut and beep alarm at the meantime.
Overload protection, shortcut protection, overheat protection, phase failure protection and electricity leakage protection.

Description
We have the ability to custom make our drying ovens and as such we require some additional details. Can you answer the questions below to give us a better idea of what your specifications are for the ovens?
1. What are you planning to dry? Soil, ore, other?
2. What size oven do you need? You indicated the 64, 95 and 107 cubic foot models?
3. What internal dimensions do you want the oven and do you have any height restrictions?
4. What temperature do you need?
5. Painted steel or stainless steel for the outside surface?
6. Cart or no cart – if no cart how many shelves do you require and at what spacing?
7. Cart type – high temperature paint or stainless steel?
8. What size pans are you planning to use?
9. Do you need pans from us and if yes, what size?
10. Voltage requirements (usually 3 phase is required for the large units).
![]() | ![]() |
![]() | ![]() |