CHUTE SAMPLER

CHUTE SAMPLER

CHUTE SAMPLER FINDS WIDE APPLICATION ON DRY MATERIALS

Many installations are confronted with sampler arrangements where the material is handled in chutes and installation of samplers either result in excessive dusting or substantial loss of headroom.

The Chute Sampler is a compact, dependable automatic sampler unit which is ready for installation in a chute. Headroom loss is kept to a minimum. The cutter is sealed against entry of material when the cutter is at the rest position. The standard Type “C” Sample Cutter is carried across the stream on a heavy steel plate which acts as one of the sides of the chute chamber. The movable plate is sealed to control dusting.

Chute Samplers are available for both a vertical chute or an inclined chute. Any diameter chute can be accommodated by this design. Complete details will be sent on request.

The Sampler is capable of either continuous or automatic operation. Automatic operation is from 2 to 55 minutes in 1 minute increments.

grinding-flotation-chute