For Sale is a UNUSED 125 kW Inductotherm VIP Power-Trak Induction Furnace – Full System for Metal – Gold – Silver – Melting – Casting – Atomization. This melting furnace has been positioned onto a custom heavy-duty multipurpose melt deck but never commissioned or even connected to electrical or cooling supply.
Model: VIP 125 kW Power-Trak from Inductotherm
Complete Top-of-the-Line Induction Furnace System that was never put into production.
125-Kilowatt VIP Power-Trak Power Supply
- Power Required: 460 Volt / Three Phase / 60 Hz / 145 kVA / 185 Amps
- Output: 125 kW / 1,000 Volts / 1,200 Amps / 3,200 Hz.
- Circuit Protection System
- Safety Isolation Transformer
- Ground/Molten Leak Detector
- NEMA 12 Combination Electric Starter
- Integrated Internal Closed Water Cooling System
- Centrifugal Pump and Motor
- Power Controls
- Expansion/Air Separator Tank
- Side Stream Water De-ionizers
- Manifold
- Thermal Switches
- INCLUDES: Emergency 12-Volt Water Cooling Pump
250 kg Dura-Line Model 500 Furnace Assembly
- Locking Swing Crucible Lid
- Integral Fume Ring
- Integral Hydraulic Tilt Cylinders and Control Valve
- Heavy Wall Copper Induction Coil
- Leak Detection Assembly
- Stanchion Insulation
- Water Cooled Power Leads
Electric Powered Hydraulic Pump Unit
- Pump / Motor
- Pressure Relief Valve
- Pressure Gauge
- Return Line Filter
- Reservoir
- Manual Motor Starter
Dry Air Cooler
- Liebert Model DNC466A26S5046
- Closed Circuit, Sealed Water to Air Cooler
- Supplied by Inductotherm to match this furnace
- NEMA 12 Combination Starter
- Comes with and Custom Built Heavy Duty Steel Platform for Greater Protection and to Provide Better Airflow
Includes Manuals and Drawings
- Equipment inspection is always welcomed and recommended
- A Local Mechanical Contractors is available that is very familiar with this equipment and induction furnace operations.
- You can contract them to rig, load, reassemble and commission.
