Rotary Slurry Splitter / Divider (Sludge / Liquid)
Rotary table with variable speed adjustable between 0-100 RPM.
The receiving dividers (containers) are available in different sizes to suit all requirements.
Reject liquid will gather below the rotary table.
All parts in contact with the sludge/liquid are made of stainless steel.
Feed hopper 35 Liter capacity
Shakers for pre-mixing sedimentary liquids are available for every application
Options:
- The 2-valve version has a pneumatic valve, for shut-off and opening the flow and a fine manual adjustable valve for flow control. The 2-valve version is needed where pre-mixing (shaking) of sludge or dense liquids with sediments is necessary.
- The 1-valve version is supplied only with the manual valve for shutting off and controlling the flow with fine adjustments. Therefore, one will have to test the first flow rate and then load the hopper to achieve desired divisions. The liquid will flow immediately from the hopper through the valve to the containers while the rotary table had been previously started at the desired speed. The 1-valve version requires some skills to adjust the material flow volume to achieve exact sample representation and does not require air.
Select from a set of 4, 8, or 12 containers (specify if you would like a specific quantity of containers).
For slurry that is stored for a period of time, you might need an auger to mix the settled sludge material down at the bottom of the container, to obtain a uniform density.
More options:
- Removable auger to agitate material within the hopper,
- Wheeled Cart with two shelves underneath.
- Door Interlock Switch.
