Radium

How to Recover Radium, Uranium & Vanadium #6

Recovery of Uranium In the extraction process practically all of the uranium in the ore is dissolved in the nitric acid, a little remaining in the insoluble residue because of incomplete washing. An average of 2.3 per cent of the uranium oxide in the ore has remained in the residue, varying in different carload lots … Read more

Processing, Extraction & Recovery of RADIUM from Uranium Ore #5

Radium Measurements One of the most essential factors in the successful production and concentration of radium consists in following the material being concentrated, by means of careful quantitative determinations, through all the various operations from the original ore to the final product. This involves the radioactive analysis of a large number of products differing widely … Read more

RADIUM Extraction & Recovery #4

Refining in the Plant The first treatment of the radium-barium sulphates is of great importance, as the whole capacity of the plant, as far as the radium goes, depends upon this first treatment. If the sulphates can not be handled as rapidly as produced, the actual amount of radium refined each year must necessarily be … Read more

VANADIUM & URANIUM Extraction and Recovery #3

As the sodium uranate requires re-treatment, owing to the fact that it carries vanadium, it is not necessary to wash the cake as completely as might otherwise be required. Most of the sodium uranate carries 7 to 9 per cent V205. It has been found practically impossible to obtain a precipitate that does not carry … Read more

URANIUM, RADIUM & VANADIUM Ore Processing #2

The method of treating carnotite, a uranium, ore used by the Bureau of Mines is outlined in this chapter. Leaching, Filtering, and Washing Ore The ore is ground to 20 mesh and is leached with strong hot nitric acid in acid-proof earthenware pots. The amount of acid used is 121 pounds of 100 per cent … Read more