Table of ContentsSearch for Weight Split All metallurgical balance techniques, old or new are based on mathematically equating the inflow and outflow of specific components
Table of ContentsExperimental MaterialsExperimental ProceduresSettling TestsTwo-Stage Mechanical DeslimingInsoluble-Slimes FlotationPotash FlotationLeaching Insoluble-Slimes Flotation ConcentratesFiltration TestsExperimental Results and DiscussionSettling TestsInsoluble-Slimes Flotation Using Various Reagent SchemesComparison of Mechanical
Table of ContentsPlain Bearings & Rolling BearingsHydrostatic Bearings First, let us look at the mill itself. Fig. 1 shows that there are four basic components
Table of ContentsFLOTATION CONTROL TECHNIQUESControl Flotation by Feed-forwardFeedback Control for Stabilising Circuit OperationControlling Circulating Loads in FlotationSelection of a Computer Control SystemOn-Stream X-Ray Analysis Flotation circuit
The “best” control strategy for a given plant is the strategy that most closely fulfills the overall operating objectives. The best strategy will likely not
Table of ContentsMaterialsExperimental ProcedureResults and DiscussionLeaching Characteristics of MatteAgitator Speed and Leaching Time StudiesEffect of AirflowExtraction Dependence on Particle SizeGas Composition Influence on ExtractionLeaching Behaviour of
An eddy current is a circulating electric current induced within the body of a conductor when that conductor either moves through a nonuniform magnetic field or is
Acid Treatment of Bentonite: Under the influence of a mineral acid the exchangeable alkaline earth ions of bentonite are substituted by hydrogen ions. Moreover, depending on
As the assayer at a mine is often called upon to relieve suffering in an emergency the following hints may prove helpful. Burns.—For dry burns
Table of ContentsDescription of ProcessDistillationModern Retorting ApparatusMelting BullionFlux for BullionMuffle and Furnace Maintenance It sometimes falls to the lot of the assayer doing commercial work