If you are looking for an affordable Hydrocyclone Manufacturers, contact us.
Hydrocyclone is a continuous device that utilizes centrifugal force to accelerate the settling rate of particles. When feed slurry enters the hydrocyclone tangentially under pressure, as result of the high centrifugal forces, particles coarser than the “cut point” size migrate into a primary vortex adjacent to the wall and move forward to discharge with a small volume of water via the spigot. Particles finer than the “cut point” size migrate into a secondary upward-moving vortex, along the axis of the hydrocyclone and discharge with the majority of the water via vortex finder.
The Hydrocyclone is one of the most common classification unit in the minerals industry, it is widely used in the mineral industry processing as a classifier, which has proved extremely efficient at fine separation size. Hydrocyclone is widely used in closed circuit grinding operations but it also has many other applications, such as desliming, degritting, and thickening.
Features & Benefits
Technical Specification of out Hydrocyclone Manufacturer
Model | Interior Dia (mm) | Cone Angle | Overall Pipe Dia (mm) | Feeding Size (mm) | Feeding Pressure (Mpa) | Processing Capacity (m3/h) | Range (um) | Dimensions (L*W*H)(mm) | ||
FX660 | 660 | 20 | 180-240 | 16 | 0.03-0.2 | 250-350 | 74-220 | 1250 | 890 | 2650 |
FX500 | 500 | 20 | 130-200 | 10 | 0.03-0.3 | 140-220 | 74-200 | 850 | 790 | 2050 |
15 | 74-150 | 850 | 790 | 2380 | ||||||
FX350 | 350 | 20 | 80-120 | 6 | 0.04-0.3 | 60-100 | 50-150 | 775 | 605 | 1765 |
15 | 50-120 | 775 | 605 | 2115 | ||||||
FX300 | 300 | 20 | 65-115 | 5 | 0.04-0.3 | 45-85 | 50-150 | 665 | 585 | 1310 |
15 | 40-100 | 665 | 585 | 1505 | ||||||
FX250 | 250 | 20 | 60-100 | 3 | 0.06-0.35 | 40-60 | 40-100 | 540 | 480 | 1180 |
15 | 40-100 | 540 | 480 | 1220 | ||||||
10 | 30-100 | 540 | 480 | 1380 | ||||||
FX200 | 200 | 20 | 40-65 | 2 | 0.06-0.35 | 25-40 | 40-100 | 435 | 360 | 1050 |
15 | 30-100 | 435 | 360 | 1115 | ||||||
10 | 30-100 | 435 | 360 | 1205 | ||||||
FX150 | 150 | 20 | 30-45 | 1.5 | 0.06-0.35 | 11-20 | 30-74 | 280 | 295 | 690 |
15 | 30-74 | 280 | 295 | 900 | ||||||
8 | 30-74 | 280 | 295 | 1270 | ||||||
FX125 | 125 | 17 | 25-40 | 1 | 0.06-0.35 | 8-15 | 20-100 | 210 | 185 | 620 |
8 | 20-74 | 250 | 240 | 985 | ||||||
FX100 | 100 | 20 | 20-40 | 1 | 0.06-0.35 | 5-12 | 20-100 | 260 | 210 | 525 |
15 | 20-100 | 268 | 215 | 720 | ||||||
8 | 20-100 | 268 | 215 | 1000 | ||||||
FX75 | 75 | 15 | 15-22 | 1.5 | 0.1-0.4 | 2-5 | 20-74 | 240 | 230 | 465 |
6 | 5-40 | 240 | 230 | 800 | ||||||
FX50 | 50 | 15 | 11-16 | 0.3 | 0.1-0.4 | 1-2 | 10-74 | 160 | 155 | 350 |
6 | 5-30 | 160 | 155 | 590 |
Copyright 2012-2024 911Metallurgist | All Rights Reserved